180SX TEE (ASH)

TSHIRT SIZE CHART

HOODIE SIZE CHART

To help your garments last longer, follow these steps:

1. Turn the garment inside out to minimize rubbing and wear.
2. Wash using low-temperature or cold settings.
3. Use gentle detergents to avoid damaging the fabric.
4. Tumble dry on low or hang the garment to dry naturally.

Not following these care instructions may result in excessive wear and could damage the print or design.

PREPARE THE SURFACE

• Ensure the surface is clean and free from dirt or debris.
• Avoid using cleaners that contain wax or additives.
• We recommend using 80% isopropyl alcohol or a degreaser that will not harm the surface.

REMOVE THE BACKING PAPER

1. Place the sticker face down on a flat surface.
2. Start by folding the top left corner of the backing paper.
3. Slowly peel the backing paper away from the transfer tape.
4. If the sticker stays attached to the backing paper, gently press it back onto the transfer tape. Wait a few seconds, then try again.
5. Once the backing paper is removed, carefully lift the sticker and position it over the desired area for application.

APPLY THE STICKER

1. Position the edge of the transfer tape where you want the sticker to go.
2. Using a squeegee or plastic card, apply firm and even pressure to smoothly attach the sticker to the surface.
3. Once the sticker is in place, leave the transfer tape on.
4. Apply pressure with the backing paper over the transfer tape.
5. Starting at a corner, slowly peel away the transfer tape in the same motion as removing the backing paper.
6. If the sticker stays with the transfer tape, press it back onto the surface, apply pressure again, wait a few seconds, and try removing the transfer tape once more.